Treatment for Textile, Sugar, Dairy, Food processing, Pharmaceutical and other industries.
We also design STP's based on latest MBBR Technology.
We can also provide packaged ETP's and STP's  as per the specific requirements of the customers.

Areas of strength:
» Petrochemical Plants
»Refineries
»Fertilizer Industry  Power Plants Steel Mills
»Sugar Mills
»Mines
»Food & Beverage Industry
»Pharmaceutical & Drug Plants
»Institutions

Water Test Kit Will be replaces with Water Hardness Test Kit. Water Hardness Test Kit :  
This Kit used for testing Hardness and Softness of Water. It is a combination of four reagents.

Ozone is a tri-atomic allotrope of Oxygen for med by recombination of oxygen atoms. It is a colorless gas with characteristics pungent odour and can easily be detected at low level of 0.05 ppm. It is a very strong oxidant and is over 3000 times more powerful disinfectant than Chlorine. It disinfects, oxides, deodorizes and decolorize

One method of disinfection is Ozonation. Ozone generators are used in some systems to produce small quantities of ozone gas, which is very strong oxidizing agent and is effective in killing bacteria with even brief exposure times. Ozone is also effective in oxidizing organic matter, iron and Manganese. The use of ozone does not form trihalomethanes, as can chlorine. It produces no tastes or odors in the water. However, as a gas, ozone is unstable and has a very short time, so it must be generated at the point of use.


»Most modern and proven design
»Microprocessor controlled
»With built-in air preparation unit
»Fully automatic & ease of operation
»Inter-locking & signaling system
»Digital Ozone output indicator
»Output regulation from 10 to 100%
»Efficient air cooling upto 10 gm/hr
»Refrigeration cooling 10 gm onwards
»Low maintenance requirement
»Fault diagnostics by display
»Efficient Ozone concentration on air
»Stainless Steel cabinet & Ozone cells

One of the growing trends in disinfection is the use of Ultraviolet (UV) disinfection units. Throughout the 1980’s they became much more widely used in industrial and commercial applications, and with the development of new materials and commodity production of components, UV units are becoming popular for residential use.

The UV design is quite simple. Its main component is the UV light source, which is enclosed in a transparent protective sleeve. It is mounted so that water can pass through a flow chamber, and UV rays are admitted and absorbed into the stream. These rays destroys bacteria and inactivate many viruses.

UV, like distillation, disinfects water without adding chemicals, and therefore possesses some of the same benefits as distillation. It does not create new chemical complex, nor does it change the taste or odor of the water, and does not remove any beneficial minerals in the water.

Ultraviolet devices are most effective when the water has already been partially treated, and only the cleanest water passes through the UV flow chamber

Advantages
»No water storage tank is required.
»Environment friendly.
»No byproducts are left behind
»Does not remove essential elements from water.
»Beneficial for both residential and commercial purposes.

Model No	Water Flow in lph	Inlet/Outlet Connections	No of Lamps	Dimensions in mm UV Chamber (L X Diameter) Control Panel (L X B X H)
PW 100	100	3/8” (M)	1	360 X 60 165 X 62 X 210
PW 500	500	½” BSP (M)	1	480 X 60 165 X 62 X 210
PW 1000	1000	¾” BSP (M)	1	955 X 65 X 165 X 62 X 210
PW 2000	2000	1” BSP (M)	2	955 X 105 165 X 62 X 210

These Economically Design Ultraviolet Systems are ideal for Point-of-Use Filtration and utilize the new "mini-ballast" technology. 1 GPM - 4 GPM

These Compact Design Ultraviolet Systems are ideal for Point-of-Use Filtration or RO pre or post sterilization
2 GPM - 24 GPM

Ultraviolet Series were designed for both residential and commercial/industrial applications. 5 GPM - 80 GPM

Optimal bacteria reduction through new technologies and a greater range of controls.
1.5 GPM - 20 GPM
11 GPM - 60 GPM

The SUV Ultraviolet Series is designed for commercial/industrial applications. 24 GPM - 800 GPM

These ultraviolet systems can be used for primary disinfection on RO intakes for a variety of fresh or saltwater aquaculture, municipal water applications.
8 GPM - 48 GPM

CountReduction UVUsing a shorter wavelength UV, these ultraviolet systems are designed specifically for the reduction of Total Organism Count. They can also be used to remove residual chlorine.

Chlorine Tablets add a concentration to the water supply, where oxidizing ability of this chemical “ burns up” the organic contaminants of the water. It kills many pathogenic bacteria (including those which cause typhoid, Cholera and Dysentery), however cyst-forming protozoa (Cryptosporidium) which cause amoebic and giadiasis are extremely resistant to chlorination, they need more contact time to inactivate. It also treats organically- related taste, color, and odor problems.Chlorine Tablets are typically fed into a well, or into a retention tank where concentration and contact time can be controlled.

This can again be used for disinfecting water and killing of pathogens.
Concentration: 6%, 9% and 12%.

The Powder is used for disinfecting water and killing of Pathogens. The solution maintains strength for 1 week. 33% pure Chlorine with test certificate.

It is a water Disinfectant and water-purifying pouch. Appearance is White/ Cream colored fabric pouch containing powder, pouch is stitched close.Chemical Filling Specification: White powder containing >99% Stable BleachingPowder – ISI grade having 29% + 1% Free available Chlorine content, when packed. Non – toxic, non-hazardous, eco-friendly retardant <1% Processed and blended in homogeneous dry mass and filled in fabric pouch. Chlorine Bags are available in different sizes and capacities.

Adding Bromine and Iodine to water destroys unwanted organic species. Both iodination and bromination have been proven effective in controlling most disease- producing bacteria, even with relatively short contact time. These methods have been used successfully for disinfection of swimming pools, but bromine is usually not used for drinking water. Iodine and Bromine, like Chlorine, will maintain a residual and can be measured easily by field or pocket test kits. Bromine is effective in concentrations similar to those needed for chlorine. Relatively high concentrations of iodine are necessary to be effective, and organic matter inhibits the efficacy of iodine.

Chlorine Tablets add a concentration to the water supply, where oxidizing ability of this chemical “ burns up” the organic contaminants of the water. It kills many pathogenic bacteria (including those which cause typhoid, Cholera and Dysentery), however cyst-forming protozoa (Cryptosporidium) which cause amoebic and giadiasis are extremely resistant to chlorination, they need more contact time to inactivate. It also treats organically- related taste, color, and odor problems.Chlorine Tablets are typically fed into a well, or into a retention tank where concentration and contact time can be controlled.

This can again be used for disinfecting water and killing of pathogens.Concentration: 6%, 9% and 12%.

The Powder is used for disinfecting water and killing of Pathogens. The solution maintains strength for 1 week. 33% pure Chlorine with test certificate.

It is a water Disinfectant and water-purifying pouch. Appearance is White/ Cream colored fabric pouch containing powder, pouch is stitched close. Chemical Filling Specification: White powder containing >99% Stable Bleaching Powder – ISI grade having 29% + 1% Free available Chlorine content, when packed. Non – toxic, non-hazardous, eco-friendly retardant <1% Processed and blended in homogeneous dry mass and filled in fabric pouch. Chlorine Bags are available in different sizes and capacities.

Adding Bromine and Iodine to water destroys unwanted organic species. Both iodination and bromination have been proven effective in controlling most disease- producing bacteria, even with relatively short contact time. These methods have been used successfully for disinfection of swimming pools, but bromine is usually not used for drinking water. Iodine and Bromine, like Chlorine, will maintain a residual and can be measured easily by field or pocket test kits. Bromine is effective in concentrations similar to those needed for chlorine. Relatively high concentrations of iodine are necessary to be effective, and organic matter inhibits the efficacy of iodine.